NHTSA DATA SNAPSHOT · SEP 21 2026MODEL MATCH ≠ VIN MATCHCHECK A VIN AT NHTSA ↗
RECALLROADTHE CAMPAIGN RECORD

MODEL-YEAR RECALL REPORT

2014 Peterbilt 386 recalls

NHTSA's September 21, 2026 snapshot lists 5 safety recall campaigns for the 2014 Peterbilt 386, spanning 4 component groups. A model match does not confirm that a specific VIN is included.

Official source: NHTSA recall campaign file · Snapshot September 21, 2026

Distinct campaigns5not VIN-specific
Component groups4distinct top-level categories
Latest recordApril 6, 2020report received
VIN resultNot checkeduse official lookup

01 / OFFICIAL CAMPAIGNS

2014 Peterbilt 386 recall campaigns

The 2014 Peterbilt 386 report contains 5 distinct NHTSA campaigns; the most recently received record is campaign 20V199000 dated April 6, 2020.
Component
ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, AIR
Report received
April 6, 2020
Potential units
460,515campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles.".

Why it matters: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Remedy

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Owner notification: May 26, 2020 · Filing manufacturer: PACCAR Incorporated

Component
ELECTRICAL SYSTEM
Report received
July 22, 2015
Potential units
288campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2012-2016 Peterbilt 365, 367, 384, 386, 388, 389, 567, 579, and 587 trucks manufactured January 13, 2011, to April 20, 2015. The affected trucks, equipped with extended-body Leece Neville alternators, have alternator charge cables that may chafe against a formed metal freon discharge line.

Why it matters: If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.

Remedy

Peterbilt will notify owners, and dealers will reroute the alternator charge cable away from the metal freon line and install a plastic insulator on the cable end, free of charge. The recall began on September 23, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000. Peterbilt's number for this recall is 715-K.

Owner notification: September 23, 2015 · Filing manufacturer: PACCAR Incorporated

Component
ELECTRICAL SYSTEM
Report received
May 8, 2015
Potential units
1,494campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2014-2016 Kenworth T660, T680, T880 trucks manufactured February 18, 2013, to April 10, 2015, and 2011-2016 Peterbilt 386, 389, 567, 579, and 587 trucks manufactured December 13, 2010, to April 20, 2015. The affected trucks, equipped with PACCAR MX-13 engines and Delco-Remy 40SI alternators, have alternator charge cables that may chafe against a formed metal freon discharge line.

Why it matters: If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.

Remedy

PACCAR will notify owners, and dealers will reroute the alternator charge cable away from the metal freon line, free of charge. PACCAR issued an interim notification to owners on July 10, 2015. The recall began on September 16, 2015. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall are 15KWE and 515-F.

Owner notification: September 16, 2015 · Filing manufacturer: PACCAR Incorporated

Component
SEAT BELTS
Report received
January 24, 2014
Potential units
10,414campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies.".

Why it matters: If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

Remedy

PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number for this campaign is 14KWC. Peterbilt's number for this campaign is 114-B.

Owner notification: March 31, 2014 · Filing manufacturer: PACCAR Incorporated

Component
ELECTRICAL SYSTEM
Report received
May 28, 2013
Potential units
1,773campaign-wide
Defect and consequence

Defect: PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.

Why it matters: Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.

Remedy

PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13KWF. Peterbilt's recall campaign number is 0513-E.

Owner notification: June 14, 2013 · Filing manufacturer: PACCAR Incorporated

02 / COMPONENT BREADTH

What defects are listed for the 2014 Peterbilt 386?

The most frequent component groups in 2014 Peterbilt 386 campaign records are Electrical System (3), Seat Belts (1), Electronic Stability Control (Esc) (1), Service Brakes, Air (1); these counts describe filed campaigns rather than observed failure rates.
Electrical System3
Seat Belts1
Electronic Stability Control (Esc)1
Service Brakes, Air1