2010 Peterbilt 386 recalls

Defect: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles.".

Why it matters: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Owner notification: May 26, 2020 · Filing manufacturer: PACCAR Incorporated

Defect: Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag or pusher axle the gross axle weight rating, suitable tire and rim information, and recommended tire pressure information. Without this information, the vehicles do not comply with the requirements of 49 C.F.R. Part 567, "Certification.".

Why it matters: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.

Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1-940-591-4000. Peterbilt's number for this campaign is 1113-F.

Owner notification: February 10, 2014 · Filing manufacturer: PACCAR Incorporated

Defect: Paccar is recalling certain model year 2011-2012 kenworth t660, t700, and t800 vehicles manufactured from april 19, 2010, through may 13, 2011, and model year 2008, 2010, and 2011 peterbilt 365, 367, 384, 386, 387, 388 and 587 vehicles manufactured from april 20, 2010, through june 11, 2011, and equipped with paccar mx engines and eaton ultrashift dm or allison automatic transmissions (without auto-neutral). the fast idle control may be activated by the operator while the transmission is in gear.

Why it matters: If the fast idle control function is engaged with the transmission in gear, the vehicle could unexpectedly accelerate and override the parking brake and , creating a risk of a crash and damage to other vehicles or property and the potential for injury to nearby pedestrians.

Kenworth and peterbilt dealers will update the engine software for the affected chassis. this service will be performed free of charge. the safety recall began on august 22, 2011. owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Owner notification: August 22, 2011 · Filing manufacturer: PACCAR INCORPORATED

Defect: Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. the oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.

Why it matters: The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.

Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. this service will be performed free of charge. the safety recall is expected to begin during march 2011. owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Owner notification: March 4, 2011 · Filing manufacturer: PACCAR INCORPORATED

Defect: Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. the circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.

Why it matters: A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.

Dealers will inspect the steering shaft using a weld placement gauge provided by trw. any steering shaft found to have been welded improperly will be replaced free of charge. the safety recall began on july 30, 2010. owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

Owner notification: July 30, 2010 · Filing manufacturer: PACCAR INCORPORATED