NHTSA DATA SNAPSHOT · SEP 21 2026MODEL MATCH ≠ VIN MATCHCHECK A VIN AT NHTSA ↗
RECALLROADTHE CAMPAIGN RECORD

MODEL-YEAR RECALL REPORT

2013 Kenworth T270 recalls

NHTSA's September 21, 2026 snapshot lists 5 safety recall campaigns for the 2013 Kenworth T270, spanning 4 component groups. A model match does not confirm that a specific VIN is included.

Official source: NHTSA recall campaign file · Snapshot September 21, 2026

Distinct campaigns5not VIN-specific
Component groups4distinct top-level categories
Latest recordApril 6, 2020report received
VIN resultNot checkeduse official lookup

01 / OFFICIAL CAMPAIGNS

2013 Kenworth T270 recall campaigns

The 2013 Kenworth T270 report contains 5 distinct NHTSA campaigns; the most recently received record is campaign 20V199000 dated April 6, 2020.
Component
ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, AIR
Report received
April 6, 2020
Potential units
460,515campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles.".

Why it matters: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Remedy

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Owner notification: May 26, 2020 · Filing manufacturer: PACCAR Incorporated

Component
VISIBILITY
Report received
May 8, 2015
Potential units
104,807campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.

Why it matters: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

Remedy

PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.

Owner notification: September 2, 2015 · Filing manufacturer: PACCAR Incorporated

CAMPAIGN

NHTSA 12V530000

Component
SERVICE BRAKES, AIR
Report received
October 12, 2012
Potential units
15campaign-wide
Defect and consequence

Defect: Kenworth is recalling certain model year 2012 and 2013 T270 and T370 medium duty trucks built with Eaton Ultrashift transmissions between December 7, 2011, and April 6, 2012. The air harness from the treadle valve on the affected vehicles was routed in a manner that can cause the air brake lines to be pinched between the cab and the electronic clutch actuator of the Eaton Ultrashift transmission. Significant movement between the cab and transmission can cause progressive wear and an eventual leak in the air lines.

Why it matters: Air lines which leak can cause reduced brake function, which may result in a crash.

Remedy

Kenworth will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 30, 2012. Owners may contact Kenworth at 1-425-828-5000.

Owner notification: November 30, 2012 · Filing manufacturer: PACCAR Incorporated

CAMPAIGN

NHTSA 12V452000

Component
EQUIPMENT
Report received
September 12, 2012
Potential units
28campaign-wide
Defect and consequence

Defect: Geo. Heiser Body Company, Inc., (Geo. Heiser Body Company) is recalling certain model year 2006 International and 2010-2013 Fuso, Hino, International, Kenworth, and Peterbilt vehicles equipped with Sure Power battery separator devices. These devices may overheat.

Why it matters: Overheating of the battery separator can result in smoke and possible fire.

Remedy

Geo. Heiser Body Company will notify owners and will replace the battery separators free of charge. The safety recall began on October 25, 2012. Owners may contact Geo. Heiser Body Company at 1-206-622-7985.

Owner notification: October 25, 2012 · Filing manufacturer: Geo. Heiser Body Co., Inc.

Component
SERVICE BRAKES, AIR
Report received
January 30, 2012
Potential units
15,932campaign-wide
Defect and consequence

Defect: Paccar is recalling certain model year 2012-2013 kenworth t170, t270, t370, t440, t470, t660, t700, t800, w900, and peterbilt 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 vehicles, manufactured from january 31, 2011, through january 19, 2012, and equipped with bendix atr-6 antilock traction relay valves. in extremely cold conditions, these bendix relay valves may potentially develop internal leakage. internal leakage can lead to air pressure being delivered to affected primary or secondary brake causing continuous brake application.

Why it matters: Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.

Remedy

Paccar will notify owners, and provide a temporary repair until bendix develops a permanent remedy. this service will be performed free of charge. the safety recall began on february 10, 2012. owner may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Owner notification: February 10, 2012 · Filing manufacturer: PACCAR INCORPORATED

02 / COMPONENT BREADTH

What defects are listed for the 2013 Kenworth T270?

The most frequent component groups in 2013 Kenworth T270 campaign records are Service Brakes, Air (3), Equipment (1), Visibility (1), Electronic Stability Control (Esc) (1); these counts describe filed campaigns rather than observed failure rates.
Service Brakes, Air3
Equipment1
Visibility1
Electronic Stability Control (Esc)1