NHTSA DATA SNAPSHOT · SEP 21 2026MODEL MATCH ≠ VIN MATCHCHECK A VIN AT NHTSA ↗
RECALLROADTHE CAMPAIGN RECORD

MODEL-YEAR RECALL REPORT

2009 Toyota Camry Hybrid recalls

NHTSA's September 21, 2026 snapshot lists 3 safety recall campaigns for the 2009 Toyota Camry Hybrid, spanning 3 component groups. A model match does not confirm that a specific VIN is included.

Official source: NHTSA recall campaign file · Snapshot September 21, 2026

Distinct campaigns3not VIN-specific
Component groups3distinct top-level categories
Latest recordOctober 22, 2015report received
VIN resultNot checkeduse official lookup

01 / OFFICIAL CAMPAIGNS

2009 Toyota Camry Hybrid recall campaigns

The 2009 Toyota Camry Hybrid report contains 3 distinct NHTSA campaigns; the most recently received record is campaign 15V689000 dated October 22, 2015.
Component
VISIBILITY
Report received
October 22, 2015
Potential units
1,814,284campaign-wide
Defect and consequence

Defect: Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Why it matters: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.

Remedy

Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.

Owner notification: November 25, 2015 · Filing manufacturer: Toyota Motor Engineering & Manufacturing

Component
AIR BAGS, SEATS
Report received
January 16, 2013
Potential units
3,235campaign-wide
Defect and consequence

Defect: Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

Why it matters: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.

Remedy

Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.

Owner notification: March 21, 2013 · Filing manufacturer: Southeast Toyota Distributors, LLC

Component
VISIBILITY
Report received
October 10, 2012
Potential units
2,519,424campaign-wide
Defect and consequence

Defect: Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

Why it matters: If the switch overheats, it may melt, possibly resulting in a fire.

Remedy

Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.

Owner notification: November 5, 2012 · Filing manufacturer: Toyota Motor Engineering & Manufacturing

02 / COMPONENT BREADTH

What defects are listed for the 2009 Toyota Camry Hybrid?

The most frequent component groups in 2009 Toyota Camry Hybrid campaign records are Visibility (2), Air Bags (1), Seats (1); these counts describe filed campaigns rather than observed failure rates.
Visibility2
Air Bags1
Seats1

03 / MODEL-YEAR CONTEXT

How the 2009 Toyota Camry Hybrid compares across model years

RecallRoad publishes 3 model-year reports for the Toyota Camry Hybrid, spanning 2009–2026; each year keeps its NHTSA campaign count separate.
Open the complete Toyota Camry Hybrid model history →