NHTSA DATA SNAPSHOT · SEP 21 2026MODEL MATCH ≠ VIN MATCHCHECK A VIN AT NHTSA ↗
RECALLROADTHE CAMPAIGN RECORD

MODEL-YEAR RECALL REPORT

2009 Peterbilt 387 recalls

NHTSA's September 21, 2026 snapshot lists 5 safety recall campaigns for the 2009 Peterbilt 387, spanning 7 component groups. A model match does not confirm that a specific VIN is included.

Official source: NHTSA recall campaign file · Snapshot September 21, 2026

Distinct campaigns5not VIN-specific
Component groups7distinct top-level categories
Latest recordApril 6, 2020report received
VIN resultNot checkeduse official lookup

01 / OFFICIAL CAMPAIGNS

2009 Peterbilt 387 recall campaigns

The 2009 Peterbilt 387 report contains 5 distinct NHTSA campaigns; the most recently received record is campaign 20V199000 dated April 6, 2020.
Component
ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, AIR
Report received
April 6, 2020
Potential units
460,515campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles.".

Why it matters: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Remedy

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Owner notification: May 26, 2020 · Filing manufacturer: PACCAR Incorporated

Component
EQUIPMENT, TIRES
Report received
March 6, 2015
Potential units
213,230campaign-wide
Defect and consequence

Defect: PACCAR Incorporated (PACCAR) is recalling certain model year 2006-2016 Peterbilt 587, 579, 567, 389, 388, 387, 385, 382, 379, 378, 367, 365 and 357 trucks manufactured July 25, 2005, to February 26, 2016. The affected vehicles may be equipped with Tire and Rim Certification Labels that list a tire pressure below the actual correct amount. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 120, "Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds).".

Why it matters: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (GVWR) load listed without experiencing tire failure which would increase the risk of a crash.

Remedy

Peterbilt will notify owners and mail them a corrected Tire and Rim certification label, free of charge. The recall began on June 19, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000. PACCAR's number for this recall is 215-D.

Owner notification: June 19, 2015 · Filing manufacturer: PACCAR Incorporated

Component
ENGINE AND ENGINE COOLING
Report received
March 24, 2011
Potential units
5,831campaign-wide
Defect and consequence

Defect: Paccar is recalling certain model year 2007-2011 kenworth c500, t2000, t600, and t660, as well as model year 2009-2011 peterbilt 387 and 388 trucks equipped with caterpillar c15 engine and manufactured from may 11, 2006, through september 17, 2010. degradation of a combustion tube weld can cause radial heat impingement on the body which may burn through certain bodies used on c15 engines.

Why it matters: This could result in a fire.

Remedy

Caterpillar is handling the owner notification and remedy for this campaign. please see caterpillar's defect report 11e-006. caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. this service will be performed free of charge. due to a parts supply issue, owners will be notified by the end of april 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late july 2011. owners may contact caterpillar toll-free at 1-800-447-4986.

Owner notification: August 4, 2011 · Filing manufacturer: PACCAR INCORPORATED

Component
FUEL SYSTEM, OTHER
Report received
February 23, 2011
Potential units
4,664campaign-wide
Defect and consequence

Defect: Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. the oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.

Why it matters: The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.

Remedy

Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. this service will be performed free of charge. the safety recall is expected to begin during march 2011. owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Owner notification: March 4, 2011 · Filing manufacturer: PACCAR INCORPORATED

Component
STEERING
Report received
July 2, 2010
Potential units
9,697campaign-wide
Defect and consequence

Defect: Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. the circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.

Why it matters: A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.

Remedy

Dealers will inspect the steering shaft using a weld placement gauge provided by trw. any steering shaft found to have been welded improperly will be replaced free of charge. the safety recall began on july 30, 2010. owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

Owner notification: July 30, 2010 · Filing manufacturer: PACCAR INCORPORATED

02 / COMPONENT BREADTH

What defects are listed for the 2009 Peterbilt 387?

The most frequent component groups in 2009 Peterbilt 387 campaign records are Steering (1), Fuel System, Other (1), Engine And Engine Cooling (1), Equipment (1), Tires (1); these counts describe filed campaigns rather than observed failure rates.
Steering1
Fuel System, Other1
Engine And Engine Cooling1
Equipment1
Tires1

03 / MODEL-YEAR CONTEXT

How the 2009 Peterbilt 387 compares across model years

RecallRoad publishes 6 model-year reports for the Peterbilt 387, spanning 2007–2012; each year keeps its NHTSA campaign count separate.
Open the complete Peterbilt 387 model history →