01 / OFFICIAL CAMPAIGNS
2017 Horton Type I recall campaigns
NHTSA 20V128000
- Component
- EQUIPMENT
- Report received
- March 4, 2020
- Potential units
- 18campaign-wide
Defect and consequence
Defect: Halcore Group, Inc. (Halcore) is recalling certain 2016-2019 Horton Emergency Vehicles Type I and Type III ambulances. The A/C input power cord for the Sensata inverter may be undersized for certain inverter applications, possibly resulting in an electrical short circuit.
Why it matters: An electrical short circuit increases the risk of a fire or a shock hazard.
Remedy
Halcore has notified owners, instructing them to contact Sensata for a replacement power cord, free of charge. The recall began March 10, 2020. Owners may contact Halcore customer service at 1-800-447-0343.
Owner notification: March 10, 2020 · Filing manufacturer: Halcore Group, Inc.
NHTSA 19V281000
- Component
- BACK OVER PREVENTION
- Report received
- April 9, 2019
- Potential units
- 49campaign-wide
Defect and consequence
Defect: Halcore Group, Inc. (Halcore) is recalling certain 2016-2019 Horton Type I and Type III ambulances equipped with ASA Electronics back-up camera displays. The displays may revert back to the factory default settings which may cause the camera image to be reversed.
Why it matters: The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.
Remedy
Horton will notify owners and dealers will add a harness relay capacitor module to prevent the image from reversing, free of charge. The recall began June 13, 2019. Owners may contact ASA customer service at 1-800-384-4400 or Halcore at 1-800-447-0343.
Owner notification: June 13, 2019 · Filing manufacturer: Halcore Group, Inc.
NHTSA 18V605000
- Component
- EXTERIOR LIGHTING
- Report received
- September 11, 2018
- Potential units
- 243campaign-wide
Defect and consequence
Defect: Halcore Group, Inc. (Halcore) is recalling certain 2017-2018 Horton Type I and Type III ambulances, equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment.".
Why it matters: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Remedy
Halcore will notify owners, and Whelen will replace the brake lights, free of charge. The recall began October 16, 2018. Owners may contact Halcore customer service at 1-800-447-0343.
Owner notification: October 16, 2018 · Filing manufacturer: Halcore Group, Inc.
02 / COMPONENT BREADTH