NHTSA DATA SNAPSHOT · SEP 21 2026MODEL MATCH ≠ VIN MATCHCHECK A VIN AT NHTSA ↗
RECALLROADTHE CAMPAIGN RECORD

MODEL-YEAR RECALL REPORT

2011 Itasca Ellipse recalls

NHTSA's September 21, 2026 snapshot lists 4 safety recall campaigns for the 2011 Itasca Ellipse, spanning 2 component groups. A model match does not confirm that a specific VIN is included.

Official source: NHTSA recall campaign file · Snapshot September 21, 2026

Distinct campaigns4not VIN-specific
Component groups2distinct top-level categories
Latest recordDecember 6, 2012report received
VIN resultNot checkeduse official lookup

01 / OFFICIAL CAMPAIGNS

2011 Itasca Ellipse recall campaigns

The 2011 Itasca Ellipse report contains 4 distinct NHTSA campaigns; the most recently received record is campaign 12V566000 dated December 6, 2012.
CAMPAIGN

NHTSA 12V566000

Component
ELECTRICAL SYSTEM
Report received
December 6, 2012
Potential units
1,521campaign-wide
Defect and consequence

Defect: Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.

Why it matters: Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.

Remedy

Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.

Owner notification: December 26, 2012 · Filing manufacturer: Winnebago Industries Inc.

CAMPAIGN

NHTSA 11V156000

Component
EQUIPMENT
Report received
March 8, 2011
Potential units
25campaign-wide
Defect and consequence

Defect: Winnebago is recalling certain model year 2011 tour and itasca ellipse motor homes manufactured from august 9, 2010 through january 21, 2011. these vehicles have the potential for a lp hose connection to be damaged when the slideout room is operated. if the lp hose makes contact with the slideout ram, it could be disconnected. if this were to happen, a leak would occur when the lp tank is opened.

Why it matters: The leaking lp then has the potential to ignite, which could result in personal injury or death.

Remedy

Dealers will inspect the hose and relocate a pipe clamp as well as adding a second clamp to the hose to ensure clearance is maintained during the operation of the slideroom. this service will be performed free of charge. the safety recall began on march 25, 2011. owner may contact winnebago at 641-585-6939.

Owner notification: March 25, 2011 · Filing manufacturer: WINNEBAGO INDUSTRIES, INC.

CAMPAIGN

NHTSA 11V096000

Component
EQUIPMENT
Report received
February 14, 2011
Potential units
283campaign-wide
Defect and consequence

Defect: Winnebago is recalling certain model year 2010-2011 tour and itasca ellipse motor homes manufactured from august 7, 2009 through february 7, 2011, for failing to comply with the requirements of part 567, "certification." the vehicles are equipped with labels indicating the wrong type of load range tires.

Why it matters: These vehicles do not comply with the requirements of part 567 certification.

Remedy

Owners will be provided with new tire information labels and installation instructions. at the customer's option, a dealer can perform the installation for them. this service will be performed free of charge. the safety recall is expected to begin on february 25, 2011. owner may contact winnebago at 1-641-585-6939.

Owner notification: February 25, 2011 · Filing manufacturer: WINNEBAGO INDUSTRIES, INC.

Component
EQUIPMENT
Report received
October 26, 2010
Potential units
18,461campaign-wide
Defect and consequence

Defect: Winnebago is recalling certain recreational vehicles equipped with 1200-series norcold refrigerators. the population of refrigerators being addressed contains either a sensing algorithm or thermal switch to shut off power to the refrigerator when high temperatures are detected in order to prevent a potential fire. the response times of the sensor algorithm and thermal switch devices to stop power are not sufficient.

Why it matters: The sensing algorithm or thermal switch installed to shut off power to the refrigerator when high temperatures are detected due to a possible hydrogen gas leak may not shut off in sufficient time to prevent a fire.

Remedy

Winnebago is working with norcold to identify and notify any affected owners. owners will be instructed to contact norcold dealers to receive the remedy free of charge. please see norcold's defect report 10e-049 for additional information. the recall began during december 2010. owners may contact norcold at 1-800-767-9101 or winnebago at 1-641-585-3535.

Owner notification: December 15, 2010 · Filing manufacturer: WINNEBAGO INDUSTRIES, INC.

02 / COMPONENT BREADTH

What defects are listed for the 2011 Itasca Ellipse?

The most frequent component groups in 2011 Itasca Ellipse campaign records are Equipment (3), Electrical System (1); these counts describe filed campaigns rather than observed failure rates.
Equipment3
Electrical System1

03 / MODEL-YEAR CONTEXT

How the 2011 Itasca Ellipse compares across model years

RecallRoad publishes 2 model-year reports for the Itasca Ellipse, spanning 2010–2011; each year keeps its NHTSA campaign count separate.
Open the complete Itasca Ellipse model history →