2010 E-One Cyclone Ii recalls

Defect: E-One Incorporated (E-One) is recalling certain 2008-2015 E-One Typhoon, Cyclone II, and Quest II vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.

Why it matters: A wheel separation from the vehicle can increase the risk of a crash.

E-One will notify owners, and dealers will replace the front axle spindle, free of charge. The recall began on April 24, 2018. Owners may contact E-One customer service at 1-352-861-3612.

Owner notification: April 24, 2018 · Filing manufacturer: E-One Incorporated

Defect: E-One Incorporated (E-One) is recalling certain 2005-2010 E-One Typhoon, Cyclone II, X-036, Cyclone III, SPGL, SPBE, FLM2, F550, I440, and I740 emergency vehicles, equipped with an IOTA 50 Amp transfer switch. Electrical connections at the transfer switch may loosen and cause excessive heat.

Why it matters: The excessive heat can increase the risk of a fire.

E-One will notify owners, and dealers will replace the IOTA transfer switch with a Powermax switch, free of charge. The recall began on February 19, 2018. Owners may contact E-One customer service at 1-352-861-3612.

Owner notification: February 19, 2018 · Filing manufacturer: E-One Incorporated

Defect: E-one is recalling certain model year 2008 through 2011 cyclone ii, typhoon, and quest vehicles manufactured from may 1, 2008, through november 28, 2011, and equipped with meritor wabco electronic stability control (esc) modules. under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (esc) system. this might cause the esc to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.

Why it matters: If the driver is slow to react during this esc intervention, the vehicle may deviate from the intended line of travel, increasing the risk of a crash.

E-one will notify owners and is working with meritor wabco to replace the control module free of charge. the safety recall began on december 16, 2011. owners may contact e-one customer service at 1-800-627-5050 or meritor on track customer service at 1-866-668-7221.

Owner notification: December 16, 2011 · Filing manufacturer: E-ONE, INC.

Defect: E-ONE IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 TYPHOON AND CYCLONE II AND MODEL YEAR 2011 TRADITION AND QUEST FIRE FIGHTING CHASSIS MANUFACTURED FROM NOVEMBER 24, 2010, THROUGH JULY 13, 2011, EQUIPPED WITH A CUMMINS ISB, ISL, ISC, or ISX DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Why it matters: This could result in asphyxiation or carbon monoxide poisoning. the heat build up from the exhaust can also result in a fire. if both clamps fail, there is a risk in some applications that the doc/dpf housing may detach completely, creating a road hazard.

E-one is working with cummins to identify and notify owners of the recall campaign. repairs will be performed by authorized cummins dealers free of charge. the safety recall began on october 10, 2011. owners may contact cummins at 1-812-377-5000 or e-one at 1-352-861-3223.

Owner notification: October 10, 2011 · Filing manufacturer: E-ONE, INC.

Defect: E-one is recalling certain model year 2010 and 2011 typhoon, cyclone ii, and tradition fire fighting vehicles manufactured from january 1, 2010, through july 1, 2011, equipped with trimark cab door mount bracket part numbers 28141-01 and 28142-01. if the mounting fasteners are not at proper torque value, the outside door handle mount bracket may potentially rotate out of position. the door system may fail to conform to the requirements of federal motor vehicle safety standard no. 206, "door locks and door retention components.".

Why it matters: The door may not stay closed and could open without warning during a crash. persons or objects could fall from the vehicle, possibly resulting in injury.

E-one is working with trimark and trimark will notify vehicle owners using e-one letterhead. repairs will be made by e-one service centers or by trimark personnel as needed. repairs will be performed free of charge. the safety recall began on july 22, 2011. owners may contact trimark at 1-641-394-1095 or e-one at 1-352-861-3223.

Owner notification: July 22, 2011 · Filing manufacturer: E-ONE, INC.